Table of Contents
Advertisement
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
– The antenna mounting screws should be torqued to 2.37 to 2.60 N.m (21.0 to 23.0 in-lbs).
– If sealing of the antenna holes is needed, then RTV is recommended to be applied around
the edge of each hole between both the UAV skin and ground plane and the ground plane
and antenna. Ensure that the antenna remains in electrical contact with the ground plane.
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SMALL SATCOM
Page 13
18 Feb 2021
Advertisement
Table of Contents
