Cisco CP-7941G-RF Phone Manual page 35

If you want to...
Remove any conference
participant
End your participation in a
conference
Tips
• Calls must be on the same line before you can add them to a conference. If calls are on different
lines, transfer them to a single line before using Confrn or Join. (Join is on SCCP phones only.)
• Depending on how your phone is configured, if you leave a conference after creating it, the
conference might end. To avoid this, transfer the conference before hanging up.
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified CallManager 5.1 (SCCP and SIP)
Then...
1. Highlight the participant's name.
2. Press Remove.
You can remove participants only if you initiated the conference.
Hang up or press EndCall.
Basic Call Handling
27