Forwarding All Calls To Another Number - Cisco CP-7941G-RF Phone Manual

If you want to...
Send an active, ringing, or on-hold call
to a voice messaging system
Tip
If your phone displays a menu that disappears before you make your selection, you can press iDivert
again to re-display the menu. You can also ask your system administrator to configure a longer timeout
value.

Forwarding All Calls to Another Number

You can use Call Forward All to redirect incoming calls from your phone to another number.
If you want to...
Set up call forwarding on your
primary line
Cancel call forwarding on
your primary line
Verify that call forwarding is
enabled on your primary line
Set up or cancel call
forwarding remotely, or for a
non-primary line
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified CallManager 5.1 (SCCP and SIP)
Then...
Press iDivert. One of two things occurs:
• The call is transferred to your voice messaging system.
• Your phone screen displays a menu that allows you to
choose between your voice messaging system or the
voice messaging system of the original called party.
Choose an option to redirect the call.
Then...
Press CFwdALL and enter a target phone number.
Press CFwdALL.
Look for:
• The call forward icon above the primary phone number:
• The call forwarding target number in the status line.
1. Log in to your User Options web pages. (See
User Options Web Pages, page
2. Access your call forwarding settings (See
Settings on the Web, page
Note When call forwarding is enabled for any line other than the
primary line, your phone does not provide you with any
confirmation that calls are being forwarded. Instead, you must
confirm your settings in the User Options web pages.
Accessing Your
49.)
Controlling Line
55.)
Basic Call Handling
.
23