Cisco Catalyst 4503 Datasheet page 2

© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Table 1. Cisco Catalyst 4500 Line-Card Support Options
Line-Card Type Per Slot Bandwidth
Cisco Catalyst 4500 E- 24 Gbps
Series Line Cards
Cisco Catalyst 4500 Series 6 Gbps
Classic Line Cards
Cisco Catalyst 4500 E-Series Gigabit Ethernet Line Cards
The Cisco Catalyst 4500 E-Series 48-port Gigabit Ethernet line cards provide high-performance
10/100/1000 switching at 24 Gbps per slot. (2:1 oversubscribed). The Cisco Catalyst 4500 48-port
10/100/1000 E-Series line cards are designed for LAN access applications where desktop users
require gigabit connection speeds. The Cisco Catalyst 4500 48-port 10/100/1000 E-Series line
cards are available in two versions: one with standard PoE 802.3af, and the second one with
standard PoE 802.3af and PoEP ready features such as support for up to 30 Watts per port.
Cisco Catalyst 4500 E-Series 10 Gigabit Ethernet Line Card
The Cisco Catalyst 4500 E-Series now supports 10 Gigabit Ethernet line cards. The Cisco Catalyst
4500 6-port E-Series 10 Gigabit Ethernet line card (2.5:1 oversubscribed) can be deployed for
high-performance 10 Gigabit Ethernet aggregation in the campus, in small to medium networks as
a core switch, or for high-performance wiring closets where additional 10 Gigabit Ethernet uplinks
are required. The Cisco Catalyst 4500 E-Series 6-port 10 Gigabit Ethernet line card supports
standard X2 optics as well as the Cisco TwinGig modules.
The Cisco TwinGig Converter Module converts a single 10 Gigabit Ethernet X2 interface into two
Gigabit Ethernet port slots, which can be populated with appropriate Small Form-Factor Pluggable
(SFP) optics, providing a total of 12 wire-speed Gigabit Ethernet ports if used in all 6 X2 interface
slots. The flexibility provided by the TwinGig Converter Module enables customers to aggregate
Gigabit Ethernet and 10 Gigabit Ethernet LAN access switches on a single line card. The ability to
support either Gigabit Ethernet uplinks or 10 Gigabit Ethernet ports on a single line card further
demonstrates the flexibility and the investment protection of the Cisco Catalyst 4500 Series
architecture (Figure 1).
TwinGig modules convert a single X2 port into two Gigabit Ethernet SFP ports.
1
Supervisor Engine 6-E, Supervisor Engine V-10GE and Supervisor Engine V are the only supervisors
supported on 4510R-E and 4510-R Chassis
2
Supervisor Engine II-Plus-TS is supported on 4503-E and 4503 Chassis only
Chassis Support Supervisor Support
Cisco Catalyst 4503-E, 4506- Supervisor Engine 6-E,
E, 4507R-E, and 4510R-E
Supervisor Engine 6L-E,
Cisco Catalyst 4503, 4506, Supervisor Engine 6-E,
1
4507R, and 4510R Switches
Supervisor Engine 6L-E,
Cisco Catalyst 4503-E, 4506-
Supervisor Engine V-10GE,
E, 4507R-E, and 4510R-E
Supervisor Engine V,
Switches
Supervisor Engine IV,
Supervisor II-Plus-10GE,
Supervisor Engine II-Plus,
Supervisor Engine II-Plus-TS
Data Sheet
2
Page 2 of 23