To Connect To A Computer Using The Cassiopeia Usb Cable; Required System Configuration - Casio Cassiopeia E-125 Getting Started Manual

To connect to a computer using the CASSIOPEIA USB cable

1. Plug the USB cable into the USB port of your computer.
2. Turn off your CASSIOPEIA.
3. Connect the other end of the USB cable to your CASSIOPEIA.

Required System Configuration

The minimum system configuration required for running ActiveSync
below.
ActiveSync
• Microsoft
greater, or Windows 95/98. (U.S. version)
• Desktop computer with a Pentium processor for Windows NT (166MHz required for
Windows 2000)
• Desktop computer with a 486/66 DX or higher processor (Pentium P90
recommended) for Windows 95/98
• 16MB of memory for Windows 95/98 (more memory will give improved
performance) or Windows NT Workstation 4.0 (32MB recommended for Windows
NT, 64MB recommended for Windows 2000)
• Hard disk drive with 10 to 50MB of available hard disk space (actual requirements
will vary based on selection of features and user's current system configuration)
• Available 9 or 25-pin communications port (adapter required for 25-pin
communication port), Infrared port, or USB port (available for Windows 95/98 or
Windows 2000 only).
• One CD-ROM drive
• VGA graphics card or compatible video graphics adapter at 256 color or higher
• Keyboard
• Microsoft Mouse or compatible pointing device
USB port
® 3.1 System Requirements
® ®
Windows 2000, Windows NT
CASSIOPEIA USB cable
®
Workstation 4.0 with Service Pack 3 or
21
®
3.1 is described