Table of Contents
Advertisement
PAGE
CALLER ID
34 34 34 34 34
"BLOCKED" AND
"UNAVAILABLE"
CALLER ID
INFORMATION
If a caller chooses to partially or completely
"block" CALLER ID information, a message will
appear on the display indicating that the name
and/or phone number has been blocked:
BLOCKED
# BLOCKED
Time and date information for the call is
recorded into the TA-160's memory.
If, for any other reason, the name and/or
number information is currently not available
from your local phone company, an
"Unavailable" message will appear on the
display:
UNAVAILABLE
# UNAVAILABLE
NOTE:
Depending on your local telephone company, the name
and/or number field may also appear blank in the
display.
(Continued)
DELETING INDIVIDUAL
CALLER ID ENTRIES
Specific CALLER ID entries may be deleted.
1
CALLER ID
Press
.
CALLER ID
2
SCROLL DOWN
UP
Press the
or
ARROW KEY
to locate the entry you
wish to delete.
SCROLL
3
ERASE/FLASH
Press and release
"DELETE ?" message will appear and you
will hear a tone.
ERASE
SAVE
FLASH
HOLD
WED
1/27
12:34 AM
DELETE ?
310-555-1212
4
ERASE/FLASH
Press
again within 5
seconds to confirm. The Caller ID entry
will then be deleted and you will hear a
confirmation tone.
NOTE:
Upon deleting Caller ID entries, any attached recorded
message will be saved.
DELETING ALL CALLER
ID INFORMATION
1
CALLER ID
Press
.
CALLER ID
2
ERASE/FLASH
Press and hold
you see the "DELETE ALL ?" message
appear on the display and you will hear a
tone.
ERASE
FLASH
WED
CALLS
.
1/27
12:34 AM
4
DELETE ALL?
310-555-1212
3
ERASE/FLASH
Press
seconds to confirm. All CALLER ID
entries will then be deleted.
NOTE:
Upon deleting Caller ID enteries, any attached recorded
message will be saved.
REPEAT
SKIP
_
+
ALL
NEW
PLAY/
PAUSE
ERASE
SAVE
FLASH
HOLD
USING THE TA-160
WITHOUT CALLER ID
SERVICE
If you do not subscribe to a CALLER ID service,
you can still benefit from most of the TA-160's
advanced features. However, you should be
aware of the following:
until
1
CALLER ID
Pressing
the "NO CALLS" message and the call
count will not be recorded.
SAVE
HOLD
NO CALLS
2
The CALL WAITING CALLER ID and
again within 5
Outside Line program options will have no
effect.
Note:
Certain sounds and voice pitches may occasionally cause
the TA-160 to incorrectly "think" that the local phone
company is sending CALL WAITING CALLER ID
information. Although no CALLER ID data will show up on
SCROLL
the display, the TA-160 may mute the phone line for a
second or so. To prevent this annoyance, simply make
sure that the CALL WAITING CALLER ID program option
is set to "OFF" (see page 8).
CALLER ID
S
PAGE
35 35 35 35 35
will simply display
CALLER ID
Advertisement
Table of Contents
