Table of Contents
Advertisement
IMPORTANT TA-160
PAGE
6 6 6 6 6
FEATURES
DIGITAL GREETING AND INCOMING MESSAGES
Greetings and incoming messages are recorded on a digital chip - reducing mechanical
components and increasing reliability. The TA-160 allows a total of 14 minutes of combined
recording time for greetings and incoming messages.
Your TA-160 all digital answering machine provides you with the following
advantages:
1. Permanent Memory Back-Up: Does not require a battery during a power failure to
maintain greetings, recorded messages, Caller ID data and the remote access code. The
time and day setting is protected for about 20 minutes.
2. Reliability: There are no moving parts to break. The use of electronic components
effectively increases the life of your machine.
3. Operational Ease: There is no tape to rewind or entangle. You no longer have to worry
about replacing worn or damaged tapes.
4. Instant Access
to Messages: All messages are recorded digitally and therefore can be
TM
accessed instantly for playback.
5. Features such as VARIABLE SPEED PLAYBACK
SAVE & ERASE are only possible on all digital machines.
NOTE:
The audio quality of digitally recorded incoming messages and greetings may be subtly different than those
recorded on microcassette.
AUTO EXTENSION DISCONNECT
When you answer a call using the speakerphone or an extension phone, the TA-160 will
automatically stop playing the greeting or recording the incoming message. If it does not
stop, briefly press and release the hook-switch on the extension phone.
VOICE ASSISTED OPERATION
When operating the TA-160 at this machine or from a remote telphone, a synthesized voice
confirms machine functions and commands.
TIME/DAY STAMP
No more guess-work to determine the time and day that your messages were recorded. Your
TA-160 will digitally stamp each message with this information.
TM
, SKIP & REPEAT and SELECTIVE
PROGRAMMING THE TA-160
After installing your TA-160,
program the following options:
1. Ringer On/Off
2. Outside Line
3. Area Code
4. Call Waiting Caller ID On/Off
Note:
You should program all options at one time.
TO SELECT THE
PROGRAM OPTIONS
1
Enter the programming mode by pressing
SAVE/HOLD
continuously for 5
seconds. You will hear a beep.
ERASE
SAVE
FLASH
HOLD
2
The current programming option will
appear in the display.
PROGRAM OPTION 1:
RINGER ON/OFF
You can set the TA-160 to ring like a telephone
when a call comes in.
When "RINGER OFF" (or "RINGER ON")
appears in the display:
1
SKIP/REPEAT
Press
to turn the ringer
on (or off).
REPEAT
SKIP
_
+
RINGER ON
PAGE
7 7 7 7 7
2
When the Ringer is set, press
SAVE/HOLD
to program this option
and advance to the next option.
ERASE
SAVE
FLASH
HOLD
Note:
The factory default for the TA-160 Ringer is OFF .
PROGRAM OPTION 2:
OUTSIDE LINE
For business use, if your PBX telephone system
requires that you enter an extra digit to obtain an
outside line, the TA-160 can be programmed to
automatically dial this outside line whenever you
dial a stored Caller ID number.
After you have set the Ringer On or Off and
"OUTSIDE LINE" appears in display:
1
SKIP/REPEAT
Press
to select the
outside line digit.
REPEAT
SKIP
_
+
OUTSIDE LINE
9
2
When the Outside Line is set to the
SAVE/HOLD
desired single digit, press
to program this option and advance to the
next option.
ERASE
SAVE
FLASH
HOLD
Note:
The TA-160 will automatically add a pause of 2 -3
seconds after the Outside Line digit is dialed to insure
proper connection time to an outside line through your
telephone system.
Advertisement
Table of Contents
