2. GETTING STARTED
Recommended requirements
For best performance your computer should have at least a 1 GHz
processor, 256 MB RAM and 100 MB free disk space on your hard
drive.
Installation
Before using the CVD, familiarize yourself with the operation of your
headset by reading the enclosed Quick Guide.
Pre-Installation
Before installing the CVD perform the following:
• Fully charge your headset. Turn it on and make sure that it is in
stand-by mode. When in stand-by mode, the headset's LED flashes
blue every 3 seconds.
• If you haven't done so already, download and install Skype Version
2.0.0 or later.
• Make sure you have Microsoft Service Pack 2 installed on your
Windows XP Operating System. If not, please download at
http://www.microsoft.com/windowsxp/sp2/default.mspx
NOTE: Do not insert the Adapter until you have successfully
installed the CVD software.
6