Installing The Usb Bluetooth Adapter; Pairing The Headset - Cardo Systems Scala 700 Quick Manual

12. Since the CVD software is being upgraded from time to time, we
recommend that you check whether your version is up-to-date
by visiting our website at www.cardowireless.com/voip
Using the CVD Window (alternative skin is available)

Installing the USB Bluetooth Adapter

After restarting the computer, insert the Adapter into
an available USB port and wait until the computer
recognizes the Adapter. This process may take a
couple of minutes. A small blue light will illuminate
on the Adapter indicating that it is installed and
ready to use, and a Windows message in the Taskbar
will say: "Your new hardware is now ready to use."

Pairing the headset

Pairing is a required process between Bluetooth devices
that makes them recognize each other and retain their
respective identities. Only paired devices will connect
and communicate each time you turn them on.
Before using the CVD for the first time, you must pair
the headset with the Adapter. You will be prompted
as follows:
10
Click here to access
the tools
Voice detected
Command line