1. Select Tools and then click on
Pair headset in the pull-down
menu. The following window
will open:
2. Activate the Pairing mode of
the headset by pressing its
Wheel in and holding for
approximately 10 seconds until
the red and blue lights begin
flashing back and forth.
3. Click Continue to open the
following screen:
4. After successful completion of
the pairing process a Pairing
Successful message will appear.
Click Finish to complete the
process.
You are now ready to use your
scala-VoIP to make and receive
VoIP calls using SKYPE!
11