Related Manuals for Cardo Systems Scala-rider Q2
Summary of Contents for Cardo Systems Scala-rider Q2
- Page 1 User Guide Gebrauchsanleitung Guide d’Utilisation Guida di Avvio CARDO SYSTEMS, INC. Guia de Usario QGQ2_A5_021.indd 1 2/19/08 1:51:36 PM...
- Page 2 GPS device before using the scala-rider Q2. The retail box of the scala-rider Q2 contains one headset unit. When paired with another scala-rider Q2, the headsets can be used as an Intercom at a range of up to 1,640 ft (500m).
-
Page 3: Setup And Configuration
Family Headset STEP 1 SET UP FOR BIKE-TO-BIKE INTERCOM: PAIRING The scala-rider Q2 can be paired with up to two other headsets for Intercom communication, referred to in this guide as: Primary Buddy Secondary Buddy Pairing is a one time process. Once the headsets are paired during this Setup Procedure, they will remain paired and automatically recognize each other whenever they are within range. - Page 4 To Pair the two headsets, follow the Steps listed in the section above titled PRIMARY BUDDY PAIRING. B. The Rider is using a scala-rider Q2 and the Passenger is using a scala-rider headset (i.e. a scala-rider, a scala-rider FM or a scala- rider TeamSet Driver unit headset).
- Page 5 Q2™ | phone’s instructions. Please consult your phone’s User Manual for more information. 4. After a few seconds the phone will list the scala-rider Q2 as a discovered device. Select it and follow your phone’s instructions to accept the pairing.
-
Page 6: Attaching And Removing The Headset From The Helmet Clamp
Blue. 6. If you wish to use a Bluetooth mobile phone to make and receive calls through the headset, you must now pair your mobile phone to your GPS device by following your GPS and/or mobile phone’s instructions. -
Page 7: Using The Headset
Q2 will automatically increase and reduce its volume according to ambient noise and driving speed. AUDIO SOURCES AND PRIORITIES The different Audio Sources that are connected to the scala-rider Q2 are prioritized as follows: Highest 1. Mobile phone Audio / GPS device (Incoming/outgoing calls , GPS audio and navigation instructions) 2. -
Page 8: Troubleshooting The Intercom
NOTE: If your Bluetooth mobile phone is paired to a Bluetooth GPS device, not directly to the scala-rider Q2, some of the above Phone functions may not be compatible. When the headset is on an active phone call, any Buddy Intercom call request will be rejected automatically. -
Page 9: Status Light States
Your headset is equipped with a high-quality FM Radio receiver. This section explains how to enjoy the functions of the FM Radio. The scala-rider Q2 enables you to listen to FM Radio while you are not receiving audio from another audio source. - Page 10 | scala-rider Q2 ™ • Search for a new station as described above. • Tap the MC Button within 20 seconds of finding the station to save the current station. If you don't save the station, the Radio will exit search mode without saving the current station.
-
Page 11: Waiver And General Release
NOTICES | European CE Notice The scala-rider Q2™ headset (the “Product”) is in conformity with the following essential requirements of Council Directive 1999/5/EC (referred to as R&TTE Directive): Articles 3.1a, 3.1.b and 3.2. The Product is manufactured in accordance with Annex II of the above directive. - Page 12 | scala-rider Q2 ™ 4. You fully acknowledge our warnings and understand that: (a) risks and dangers exist in using the Device while in traffic, including but not limited to injury or illness, strains, fractures, partial and/or total paralysis, death or other ailments that could cause serious disability;...