Specifications - Canon CXDI-60G Service Manual

Table of Contents

Advertisement

5 Specifications

The CXDI-60G/60C (Imaging Unit/Power Box) is the Digital Cassette that has the mobility and
can be used on the optional angles.
(1) Imaging Unit
This unit consists of the internal sensor, PWB-60Di, PCB-AD/REF, PWB-60LED and its
outer cover. The sensor unit converts the X-ray image to the electrical signal (O/E
Conversion) and after performing the A/D conversion, transfers its signal through the Power
Box with Ethernet cable to the Control computer.
Item
Object
Effective filming
range
Number of Pixels
(About 6,500,000 pixel)
Effective
Number of Pixels
Pixel pitch
Fluorescent
substance
Output
gradations
Metal: Imaging Unit to E/O BOX
Optical fiber: E/O BOX to
Transfer method
Control computer (Through the
Multi Box)
Imaging time
Imaging cycle
Dimension
324(W) x 327(D) x 20.8(H) mm
Imaging Unit
coloring
Imaging Unit
mass
(w/o grid)
Space between
surface where
patient gets in
contact (CFRP)
and sensor
surface (glass)
Average
Heat emission
Max
Average
Power
Consumption
Max
Load uniformly: 1.47kN(150kgf), 1min
Mechanical
Load locally: 0.98kN(100kgf),
*
strength
The imaging unit is put on the plain surface with the Sensor side (Detector) is
up.
Control
computer
Power Control
Interface with a Control computer
(ON/OFF)
Grid
attach/remove
detector
CXDI-31
Cassette (built-in)
226.00 x 288.00 mm
2260 x 2280
2256 x 2878
100µm x 100µm
GOS
12bit (4,096 gradations)
Art gray
2.8Kg
(Except the cable)
3.3Kg
(Including the cable)
5.75mm
(43.2kJ/h)
162kJ/h
(12W)
45W
φ
40mm, 1min
-CXDI-C2
-CXDI-C3
1. General
CXDI-60G/60C
Cassette (built-in)/Mobile
234.24 x 284.16 mm
1476 x 1790
(About 2,600,000 pixel)
1464 x 1776
160µm x 160µm
60G:GOS/60C:CsI
A/D 14bit
Ethernet: Imaging Unit to Control
computer (Through the Power Box)
~ 1 sec.
15 sec.
344.4 (W) x 380* (D) x 22.5 (H) mm
Cool white
2.5Kg
(Except the cable)
2.8Kg
(including the cable)
Within 5.1±0.5mm.
Remote SW OFF
Max load mode
1 image per 15 Sec.
Remote SW OFF
Max load mode
(1 image per 15
-FC-24VE/FC-E21A for CXDI Control
Station
-General computer with a performance
equal to FC-24VE/FC-E21A
-CXDI-C3/C3S
None
(Power Box: Operation with Remote
switch manually)
Yes
5
Remarks
36kJ/h or less
126kJ/h or less
10W or less
35W or less
Sec.)
Self-imposed rule
For CXDI-31, local
strength applies to
the center of the
sensor.
Ethernet card is
necessary to connect
CXDI-60G/60C with
CXDI-C3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cxdi-60cCxdi-55gCxdi-55c

Table of Contents