Advertisement
GW-1000-WE / GW-1000-NWE GATEWAY
Removing the Gateway from the Wall/Panel
1. Remove the Extended Terminal Covers if applicable (see the Removing the Extended Terminal Cover section).
2. Disconnect all the communication and power supply terminals from the Gateway.
3. Disconnect the antenna by turning the antenna terminal nut anticlockwise.
4. Unscrew the bottom side screws first by using a screwdriver.
5. Hold the Gateway with one hand and unscrew the top side screws by using a screwdriver.
DIMENSIONS
Honeywell Building Solutions
Honeywell
715 Peachtree Street NE
Atlanta, GA 30308
customer.honeywell.com
buildingcontrols.honeywell.com
106.7 mm
4.207"
122.4 mm
4.819"
145.8 mm
(5.744")
110 mm
(4.331")
135 mm
(5.315")
59 mm
(2.323")
® U.S. Registered Trademark
© 2020 Honeywell International Inc.
31-00425 | Rev.10-20
Part Number: 32348979-001
45 mm
(1.772")
52 mm
(2.047")
Advertisement
