Makita DCO140 Instruction Manual
Cordless cut-out tool
Hide thumbs
Also See for DCO140:
- Instruction manual (65 pages) ,
- Technical information (8 pages) ,
- Instruction manual (29 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita DCO140
Summary of Contents for Makita DCO140
- Page 1 INSTRUCTION MANUAL Cordless Cut-Out Tool DCO140 DCO180 014848 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENH101-17 The tool is intended for cutting gypsum, wood, plastic For European countries only and soft wall tiles. EC Declaration of Conformity ENG905-1 Noise Makita declares that the following Machine(s): typical A-weighted noise level determined Designation of Machine: according to EN60745: Cordless Cut-Out Tool Model No./ Type: DCO140, DCO180... -
Page 3: General Power Tool Safety Warnings
Yasushi Fukaya Personal safety Director 10. Stay alert, watch what you are doing and use Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium common sense when operating a power tool. Do not use a power tool while you are tired or GEA006-2... - Page 4 GEB123-1 preventive safety measures reduce the risk of starting the power tool accidentally. CORDLESS CUTOUT TOOL 20. Store idle power tools out of the reach of SAFETY WARNINGS children and do not allow persons unfamiliar with the power tool or these instructions to Hold power tool...
- Page 5 18. Do not touch the bit or the workpiece 10. Follow your local regulations relating to immediately after operation; they may be disposal of battery. extremely hot and could burn your skin. SAVE THESE INSTRUCTIONS. 19. Draw attention to the need to use cutters of the correct shank diameter and which are Tips for maintaining maximum battery life suitable for the speed of the tool.
-
Page 6: Functional Description
In this situation, turn the tool off and stop the FUNCTIONAL DESCRIPTION application that caused the tool to become overloaded. Then turn the tool on to restart. If the tool does not start, the battery is CAUTION: overheated. In this situation, let the battery Always be sure that the tool is switched off and the •... -
Page 7: Operation
Changing the collet cone (country specific) 1. Slide switch CAUTION: Use the correct size collet cone for the bit which • you intended to use. Do not tighten the collet nut without installing a bit, • or the collet cone may break. 1. - Page 8 When cutting straight line, clamp a straight board firmly Installing circular guide to the material and use it as a guide. Move the tool in 1. Thumb screw the direction of the arrow with the shoe base flush with 2. Shoe the side of the guide board.
-
Page 9: Maintenance
1. Limit mark Vacuum cover (optional accessory) To perform cleaner operations, use the vacuum cover and connect the tool to Makita vacuum cleaner or dust collector. 1. Thumb screw 2. Vacuum cover 001145 Remove and check the carbon brushes regularly. -
Page 10: Optional Accessories
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Drywall guide bit • Multi purpose bit • Collet cone •... - Page 12 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 885347-227...