Advertisement
D) Enable the option by following the instructions
below:
Step
a
Press the MENU Button on the Control Panel.
Using the DOWN Button, scroll to PRINTER
b
OPTIONS and press the ENTER Key.
c
Scroll to RFID and press ENTER.
d
Press ENTER.
e
Scroll to the installed module type and press ENTER.
Press the EXIT Key, and then the YES Key.
f
(A reset will occur then, following initialization, the
RFID Indicator will appear.)
Note: If an RFID FAULT occurs, ensure that the
This completes installation. Refer to the RFID Quick Start Guide to begin using the option.
Instruction
correct module has been selected. If the
fault continues, recheck the installation.
READY
USER MENU
MEDIA SETTINGS
PRINT CONTROL
PRINTER OPTIONS
SYSTEM SETTINGS
EXIT
SYSTEM ENTER
MENU
10
Control Panel
ERROR
STOP
TEST
Displayed Message
USER MENU
MEDIA SETTINGS
PRINTER OPTIONS
MODULES
RFID
RFID MODULE
RFID MODULE
DISABLED
RFID
RFID MODULE
READY
RFID
Advertisement
