Advertisement
Step 3: Returning Operation
A) Dress the installed cables into the
existing cable bundle. RECHECK ALL
CONNECTIONS. Lower and latch the
Printhead Assembly. Replace the
Cover. Reinstall and tighten the three
Cover Screws.
B) Replace the Tearbar and
Thumbscrew (or other output
attachment). Replace the
Fascia. Tighten the Cover
Screws on the Centerplate.
C) Plug the power cord into the AC Receptacle
and turn ON the Power Switch.
9
Cover Screws
Cover Screws
Centerplate
Power Switch
AC Receptacle
Advertisement
