Table of Contents
Advertisement
SECTION 37 (Continued)
EVT PRO 2.0
All calibrations are completed by Ventil. It is the responsibility of the GTC to ship the
necessary items for annual calibration.
the only items required for calibration are the transducers or load sensors used on the EVT
PRO 2.0
is completed both a paper Certificate of Calibration and an electronic one will be available for
the owner On the Ventil Client Website.
SECTION 38
EVT PRO 2.0
To to obtain a copy of the unit's calibration report, simply log onto the following
website:
First enter the serial number of the
EVT PRO 2.0
displayed security code as shown.
Next,
"Download Transducer Calibration
Reports"
Now the calibration certificates for
the unit are displayed. Highlight and
select the desired transducer to view
or print.
®
Operations and Technical Manual (Rev 1.0 – 2016)
EVT PRO 2.0
®
CALIBRATION REQUIREMENTS
®
.
There are four of them and all four will need to be returned. When the calibration
®
CALIBRATION CERTIFICATES - VENTIL CLIENT WEBSITE
http://oms.ventil.nl/ClientLogIn.aspx
®
unit, then enter the
select
the
option
for
For calibration purposes and to reduce shipping costs
and follow the steps below:
NOT FOR COPY OR DISTRIBUTION
Page 48
Hide quick links:
Advertisement
Table of Contents
