Test Mode and Error Codes: Error Code Displays
Operational Display Codes
During operation, the radio performs dynamic tests to determine if it is working properly. Problems
detected during these tests are presented as error codes on the radio display. The presence of an
error code should prompt a user that a problem exists and that a service technician should be
contacted. Use
FAILURE CODE
FAIL 001
Synthesizer out of lock
FAIL 002
Selected Mode (Zone/Channel) codeplug
checksum error
FL 01/79 or FAIL 01/
External Emergency switch has been pressed
79
while radio is off
68P81083C20-D
Table 4-2
to aid in understanding particular operational error code displays.
DESCRIPTION
Table 4-2. Operational Display Codes
POSSIBLE SOURCE
Bad frequency data in codeplug; defective synthe-
sizer
Bad codeplug data
Emergency Power Up is not enabled in the code-
plug
4-5
December 6, 2004