Page 1
Operating Guide Remote Operation Panel AK-HRP1015G Model No. Read this document when using the AK-HRP1015G Remote Operation Panel in conjunction with AW-UE150 Series 4K Integrated Cameras. For details of operating Remote Operation Panel AK-HRP1015G, please visit the Panasonic website (https://pro-av.panasonic.net/manual/en/index.
Table of Contents Connecting the Unit to AW-UE150 Series Cameras Connection Example Connections Compatible Functions List ROP Menu (during AW-UE150 connection) ROP Menu List 01 SCENE 02 SHUTTER SPEED 03 FILTER 04 PEDESTAL 05 CHROMA 06 GAIN 07 WHITE BALANCE 08 GAMMA 09 BLACK GAMMA 10 KNEE...
* Prepare a cable that is in accordance LAN cable (straight cable) with the following serial connection cable specifications. PoE injector Switching hub with PoE support LAN cable (straight cable) Serial connection cable specifications AK-HRP1015G <CCU> connector side AW-UE150 <RS-422> connector side (RJ-45) - 3 -...
Connecting the Unit to AW-UE150 Series Cameras Connections Set the connection setting to “Serial(AW4)” or “LAN(AW4)” in the [CONNECT SETTING] menu. When connecting, observe the following points. Serial connection Use a dedicated cable to connect the <CCU> connector of this unit to the <RS-422> connector of the AW-UE150. Use a PoE injector for the power supply.
Connecting the Unit to AW-UE150 Series Cameras Compatible Functions List When the unit is used in conjunction with an AW-UE150 4K Integrated Camera, there will be functions that are limited or disabled for some of the unit's buttons, dials, and other controls. Be sure to refer to the following table. Front panel 1 Front panel 2 Front panel 3...
Page 6
Connecting the Unit to AW-UE150 Series Cameras ✓ : Enabled Number Part name Remarks ×: Disabled ✓ [GAIN] button When this button is pressed, the gain menu appears on the LCD panel. The button is lit dur- ing menu display. ✓...
Page 7
Connecting the Unit to AW-UE150 Series Cameras ✓ : Enabled Number Part name Remarks ×: Disabled ✓ [ALM] indicator [OPT] indicator × [EXT] indicator × ✓ [D.EXT] indicator ✓ Adjustment value display The adjustment value of the CC filter is not dis- played.
ROP Menu (during AW-UE150 connection) ROP Menu (during AW-UE150 connection) ROP Menu List When an AW-UE150 4K Integrated Camera is connected, the ROP menu will be as follows. NOTE To perform menu operations, upgrade the system version of the unit to V2.00-00-0.00 or later. For details on menu operations, refer to the following sections in the Operating Instructions.
Page 9
ROP Menu (during AW-UE150 connection) “MODE” (see page 23) MODE A.KNEE RESPONSE “A.KNEE RESPONSE” (see page 23) POINT “POINT” (see page 23) 10 KNEE SLOPE “SLOPE” (see page 23) “HLG KNEE SW” (see page 23) HLG KNEE SW “HLG KNEE POINT” (see page 23) HLG KNEE POINT “HLG KNEE SLOPE”...
Page 10
ROP Menu (during AW-UE150 connection) “TYPE” (see page 30) TYPE COLOR CORRECT “COLOR CORRECT” (see page 30) “SAT” (see page 30) PHASE “PHASE” (see page 30) “SAT B_Mg” (see page 30) SAT B_Mg “PHASE B_Mg” (see page 30) PHASE B_Mg “SAT Mg”...
Page 11
ROP Menu (during AW-UE150 connection) “FOCUS MODE” (see page 34) FOCUS MODE FOCUS SPEED “FOCUS SPEED” (see page 34) FOCUS “FOCUS” (see page 34) ZOOM WIDE “ZOOM WIDE” (see page 34) “ZOOM SPEED” (see page 34) 19 LENS CONTROL ZOOM SPEED “ZOOM TELE”...
Page 12
ROP Menu (during AW-UE150 connection) IRIS LEV MODE Refer to the following section in the Operating Instructions. “37 ROP SETTING” M.PED CONT LOCK SELECT AUTO BUTTON G/M PED VOL FREE+LOCK CAM SEL DTL BUTTON SKIN VOL LCD BRIGHT PANEL BRIGHT B.GAMMA VOL BUZZER PERIOD...
Page 13
ROP Menu (during AW-UE150 connection) IP ADDRESS 1 Refer to the following section in the Operating Instructions. “39 ROP IP SETTING” IP ADDRESS 2 IP ADDRESS 3 IP ADDRESS 4 IP ADDRESS PORT IP ADDRESS UPLOAD SUBNET MASK 1 25 ROP IP SETTING SUBNET MASK 2 SUBNET MASK 3 SUBNET MASK 4...
ROP Menu (during AW-UE150 connection) 01 SCENE Item Setting details SCENE1(push) Switches the scene file. Switches to the scene set to ON. SCENE2(push) SCENE3(push) SCENE4(push) - 14 -...
ROP Menu (during AW-UE150 connection) 02 SHUTTER SPEED Item Setting details MODE Selects the operation mode of the shutter. SPEED Sets the shutter speed. Sets the maximum shutter value for ELC operation. - 15 -...
ROP Menu (during AW-UE150 connection) 04 PEDESTAL Item Setting details M.PED Adjusts the black level of the master pedestal. OFFSET Sets the [PED R], [PED G], and [PED B] pedestal levels when the auto black balance is adjusted. PED R Sets the correction level of red to the master pedestal.
ROP Menu (during AW-UE150 connection) 05 CHROMA Item Setting details LEVEL Sets the color intensity of images. PHASE Finely adjusts the color phase of images. - 18 -...
ROP Menu (during AW-UE150 connection) 06 GAIN Item Setting details SUPER GAIN Sets the super gain (increased sensitivity) to ON/OFF. GAIN Adjusts the gain of images. AGC MAX GAIN When “AUTO” is selected as the [GAIN] setting, the maximum gain-up amount can be set. - 19 -...
ROP Menu (during AW-UE150 connection) 07 WHITE BALANCE Item Setting details MODE Sets the white balance mode. COLOR TEMP Sets color temperature settings. GAIN OFFSET Sets the [GAIN R] and [GAIN B] values when the [MODE] is set to “AWB A” or “AWB B”. GAIN R Adjusts the R gain.
ROP Menu (during AW-UE150 connection) 08 GAMMA Item Setting details MODE Selects the type of gamma curve. GAMMA Sets the gamma. F-REC Dynmc LV Sets the dynamic range. F-REC B.STR LV Sets the black stretch. V-REC KNEE SLOPE Sets the knee slope. V-REC KNEE POINT Sets the knee point.
ROP Menu (during AW-UE150 connection) 09 BLACK GAMMA Item Setting details BLACK GAMMA Sets the gamma curve for dark areas. RANGE Sets the maximum level for compression/expansion. - 22 -...
ROP Menu (during AW-UE150 connection) 10 KNEE Item Setting details MODE Sets the operating mode for gradation compression (knee). When [DRS] is enabled, the knee settings are disabled. A.KNEE RESPONSE Sets the auto knee response speed. POINT Sets the compression level (knee point) position for high-brightness video signals. SLOPE Sets the knee slope.
ROP Menu (during AW-UE150 connection) 11 WHITE CLIP Item Setting details WHITE CLIP Sets the white clip function to ON/OFF. WHITE CLP LV Sets the white clip level. - 24 -...
ROP Menu (during AW-UE150 connection) 12 DRS Item Setting details Sets the DRS function, which performs correction when video with high light/dark contrast is displayed, to ON/OFF. - 25 -...
ROP Menu (during AW-UE150 connection) 13 DETAIL Item Setting details MASTER DTL Adjusts the contour correction level (master). CORING Sets the level of signal (including noise) that does not activate the detail effect. V DTL LEVEL Adjusts the vertical contour correction level. FREQ Sets the boost frequency for detail.
ROP Menu (during AW-UE150 connection) 14 DOWNCON DTL Item Setting details MASTER DTL Adjusts the contour correction level (master) for images down-converted from 4K to HD. CORING Sets the level of signal (including noise) that does not activate the detail effect for images down-converted from 4K to HD.
ROP Menu (during AW-UE150 connection) 15 MATRIX Item Setting details TYPE Selects the type of color matrix. Adjusts the linear matrix between red and green. Adjusts the linear matrix between red and blue. Adjusts the linear matrix between green and red. Adjusts the linear matrix between green and blue.
ROP Menu (during AW-UE150 connection) 16 COLOR CORRECTION - 29 -...
Page 30
ROP Menu (during AW-UE150 connection) Item Setting details TYPE Selects the type of color matrix. COLOR CORRECT Selects the color component in 12-axis matrix memory to adjust. Adjusts the saturation of the color component selected in [COLOR CORRECT]. PHASE Adjusts the hue of the color component selected in [COLOR CORRECT]. SAT B_Mg Adjusts the color saturation between blue and magenta.
Page 31
ROP Menu (during AW-UE150 connection) Item Setting details SAT R Adjusts red color saturation. PHASE R Adjusts red hue. SAT R_R_Yl Adjusts the color saturation with a 3:1 red to yellow ratio. PHASE R_R_Yl Adjusts the hue with a 3:1 red to yellow ratio. SAT R_Yl Adjusts the color saturation between red and yellow.
ROP Menu (during AW-UE150 connection) 18 BRIGHTNESS Item Setting details PICTURE LEVEL Sets the target picture level for auto exposure correction. FRAME MIX Selects for frame addition (gain-up using sensor storage) amount. DAY/NIGHT Switches between standard shooting (day mode) and night-vision shooting (night mode: shooting with infrared light).
ROP Menu (during AW-UE150 connection) 19 LENS CONTROL Item Setting details FOCUS MODE Selects auto or manual mode for the focus adjustment function. FOCUS SPEED Adjusts the focus operation speed. FOCUS Adjusts the lens focus manually. ZOOM WIDE Adjusts the lens zoom to wide angle (Wide). ZOOM SPEED Adjusts the zoom operation speed.
ROP Menu (during AW-UE150 connection) 20 IRIS RELATIVE Item Setting details SENSE Adjusts the iris variable range for when the iris lever is moved from the center to the top and bottom ends. COARSE Use this dial to adjust the iris value when the IRIS lever is moved to the center. RELATIVE When this is set to “ON”, the iris lever's variable range is not dependent on the [SENSE] and [COARSE] set- tings and will include the entire range between OPEN and CLOSE.
ROP Menu (during AW-UE150 connection) 21 SYSTEM CAM Item Setting details FORMAT Displays the system format. FREQUENCY Indicates the frame frequency. 12G 3G SDI Selects the format to output 3G SDI signals when the video format of 12G SDI/OPTICAL is “1080/59.94p” or “1080/50p”.
Page 37
ROP Menu (during AW-UE150 connection) Item Setting details OSD HDMI Selects ON/OFF for the display of the camera menu, status, and other information that is output from the <HDMI> connector. OSD IP Selects ON/OFF for the display of the camera menu, status, and other information that is output from the <LAN LINK/ACT>...
ROP Menu (during AW-UE150 connection) 22 CAMERA MENU CONTROL Item Setting details MENU ON/OFF Turns the menu ON/OFF. CURSOR/PARAMETER Moves the menu cursor or changes setting values. EXECUTE Executes the selected process. - 38 -...
ROP Menu (during AW-UE150 connection) 23 ROP SETTING For details on operations and settings, refer to the following sections in the Operating Instructions. “37 ROP SETTING” - 39 -...
ROP Menu (during AW-UE150 connection) 24 CONNECT SETTING Item Setting details CONNECT MODE(push) CAM1 Sets the connection method for camera 1. Changes to settings are applied by pressing the menu operation dial. Select “LAN(AW4)” and “Serial(AW4)” when connecting with the AW-UE150. “Serial(AW4)”...
ROP Menu (during AW-UE150 connection) 25 ROP IP SETTING For details on operations and settings, refer to the following sections in the Operating Instructions. “39 ROP IP SETTING” 26 CAMERA IP SETTING For details on operations and settings, refer to the following sections in the Operating Instructions. “40 CAMERA IP SETTING”...
ROP Menu (during AW-UE150 connection) 27 AUTO IRIS SETTING Item Setting details IRIS SPEED Sets the control speed of the auto iris function. IRIS WINDOW Selects the auto iris detection window. - 42 -...
ROP Menu (during AW-UE150 connection) 28 SWITCHER LINK Item Setting details SW'IP Sets the IP address of the switcher. RECEIVE UDP PORT Sets the port number of the unit that will receive communications from the switcher. UPLOAD When you press the menu operation dial, the configured IP address and port number will be applied to the unit.
ROP Menu (during AW-UE150 connection) 29 AW CONTROLLER LINK For details on operations and settings, refer to the following section in the Operating Instructions. “47 AW CONTROLLER LINK” - 44 -...