Summary; Assembly; Assembling The Curved Handle; Installing The Grass Catcher - Grizzly ERM 1434 G Translation Of The Original Instructions For Use

sion guard as well as a grass catcher with
level gauge. Additionally, the equipment
is height adjustable to five levels and has
smooth-running wheels.
For the function of the operating parts,
please refer to the descriptions below.
The illustration how to handle the ap-
pliance can be found on page 2-4.

Summary

1 Curved handle
2 Start lever
3 Top wing nuts
4 Lower bar (2 pieces)
5 Collision guard
6 Bottom wing nuts
7 Grass catcher
8 Back wheels
9 Front wheels
10 Housing
11 Cutting height adjuster
12 2 carrying handles
13 Cable holder
14 Cable strain relief
15 Connection cable
16 Release button (not visible)
17 Power inlet

Assembly

Disconnect the plug before any
work on the equipment. There is a
risk of injury.

Assembling the Curved Handle

Install lower bar:
Place the bottom bars (4) on the
screw thread on the right and
left of the equipment housing
and tighten it with a wing nut
(6).
Install curved handle:
Fix the curved handle (1) using
the enclosed screws (14) and the
wing nuts (2) on the lower bar (3).
There are two possible positions.
Clip on the cable hook:
Clip on the cable hooks (
to the bar to fasten the connec-
tion cable (

Installing the grass catcher

Assemble the grass catcher:

Clip the rubber lip of the grass
catcher net (19) into the hard
plastic tray of the grass catcher
(9).
‚
Insert the linkage tubes (19) into
the grass catcher net (20). Make
sure to fully insert the tubes (see
ill. detail).
The tube bows fit into the
groove (21) at the bottom of the
grass catcher
ƒ
Pull the plastic straps (22) over
the linkage tubes (20).
„
Use the screws and washers
(23) from the package to mount
the linkage tubes (20).

Operation

Attention: Do not operate the ap-
pliance until the collision guard
and grass catcher are fully in-
stalled. Risk of injury!
Mounting / removing the grass
catcher
1. Lift the collision guard (5).
2. Place the grass catcher (7) on the
mounting bracket (24) provided at
GB
13)
15).
23