Functional Description - Makita GA4553R Instruction Manual

FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is
switched off and unplugged before adjusting or
checking function on the tool.
Shaft lock
Press the shaft lock to prevent spindle rotation when
installing or removing accessories.
1
► 1. Shaft lock
NOTICE:
Never actuate the shaft lock when the
spindle is moving. The tool may be damaged.
Switch action
CAUTION:
Before plugging in the tool, always
check to see that the switch trigger actuates
properly and returns to the "OFF" position when
released.
CAUTION:
Do not pull the switch lever forc-
ibly without pressing the lock-off button. The
switch may break.
To prevent the switch lever from accidentally pulled, a
lock-off lever is provided. To start the tool, pull the lock-
off lever toward the operator, and then pull the switch
lever. Release the switch lever to stop.
1
► 1. Lock-off lever 2. Switch lever
Unintentional restart proof
The tool does not start while pulling the switch lever
even when the tool is plugged. To start the tool, first
release the switch lever. Then pull the lock-off lever, and
pull the switch lever.
NOTE: Wait more than one second before restarting
the tool when unintentional restart proof functions.
Soft start feature
Soft start feature reduces starting reaction.
ASSEMBLY
CAUTION:
switched off and unplugged before carrying out
any work on the tool.
Installing side grip (handle)
CAUTION:
installed securely before operation.
Screw the side grip securely on the position of the tool
as shown in the figure.
Adjusting angle of wheel guard
WARNING:
securely locked by the lock lever with one of the holes
on the wheel guard.
The angle of the wheel guard can be adjusted by
rotating the wheel guard with pushing it down while
pushing the lock lever. Adjust the angle of the wheel
guard according to the work so that the operator can be
protected.
2
6 ENGLISH
Always be sure that the tool is
Always be sure that the side grip is
Make sure that the wheel guard is