Specifications - Makita BHP459 Instruction Manual

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Switch trigger
4-1. Lamp
5-1. Reversing switch lever
6-1. Speed change lever

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute
Battery cartridge
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for impact drilling in brick, concrete
and stone. It is also suitable for screw driving and drilling
without impact in wood, metal, ceramic and plastic.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Explanation of general view
7-1. Action mode changing ring
7-2. Adjusting ring
7-3. Graduation
7-4. Arrow
8-1. Action mode changing ring
8-2. Adjusting ring
8-3. Graduation
8-4. Arrow
Model
Concrete
Steel
Wood
Wood screw
Machine screw
High (2)
-1
)
Low (1)
High (2)
Low (1)
Overall length
Rated voltage
Net weight
) : 82 dB(A)
pA
) : 93 dB(A)
WA
BL1815 / BL1815N
1.5 kg
ENE079-1
Vibration
The vibration
determined according to EN60745:
Work mode: impact drilling into concrete
ENG905-1
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
3
9-1. Sleeve
10-1. Groove
10-2. Hook
10-3. Screw
11-1. Bit holder
11-2. Bit
12-1. Vent
13-1. Blow-out bulb
BHP459
13 mm
13 mm
38 mm
6 mm x 75 mm
M6
0 - 1,500
0 - 400
0 - 22,500
0 - 6,000
192 mm
D.C. 18 V
BL1830
1.7 kg
total value (tri-axial
2
) : 8 m/s
h,ID
2
2
) : 2.5 m/s
h,D
2
ENG900-1
vector sum)
or less
ENG901-1