Specifications - Makita DFL123F Instruction Manual

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Switch trigger
3-1. Reversing switch lever
4-1. Lamp

SPECIFICATIONS

Fastening torque
No load speed (min
Battery cartridge
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
Noise
The typical A-weighted
according to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Vibration
The vibration total
determined according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Explanation of general view
4-2. Switch trigger
6-1. Angle head
6-2. Adjusting ring
6-3. Ring
6-4. Scale
6-5. Adjusting grip
Model
Hard joint
Soft joint
Square drive
-1
)
Dimensions
Net weight
Rated voltage
noise level determined
) : 74 dB (A)
pA
value (tri-axial vector
2
) : 2.5 m/s or less
h
2
417 mm x 73 mm x 104 mm
1.5 kg
BL1415 / BL1415NA
ENE033-1
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
ENG905-1
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
We Makita
ENG900-1
manufacturer declare that the following Makita
machine(s):
sum)
Designation of Machine:
Cordless Angle Screwdriver
Model No./ Type: DFL123F
are of series production and
Conforms to the following European Directives:
2006/42/EC
ENG901-1
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
3
6-6. Hole for adjusting grip
6-7. Edge of Adjusting ring
6-8. Compression spring
7-1. Socket
7-2. Hole
7-3. Pin
DFL123F
5 - 12 N·m
5 - 12 N·m
9.5 mm
1,200
429 mm x 73 mm x 104 mm
D.C. 14.4 V
BL1430 / BL1430A / BL1440
Corporation as the
1.7 kg
ENH101-16
responsible