NEC SL1000 Features And Specifications Manual page 209

ISSUE 1.0
Operation
To call a Door Box:
Multiline Terminal
1. Press Speaker.
2. Dial 802 .
3. Dial Door Box Number (1~8).
Single Line Telephone
1. Lift the handset.
2. Dial 802 .
3. Dial Door Box Number (1~8).
To activate the Door Box strike:
Multiline Terminal
1. While talking to the Door Box, press the Flash key.
Single Line Telephone
1. While talking to the Door Box, hookflash.
To answer a Door Box chime:
1. Lift the handset or press Speaker.
To Answer a Door Box call while busy on another call:
Multiline Terminal
If you are busy on a call, the display shows the incoming Door Box call and the large LED flashes.
1. Place your active call on hold by pressing Hold.
2. When you hear dial tone, dial the door box access code (802 by default) plus the door box number
(1~8) to answer the Door Box call.
To retrieve the original call, hang up with the door box and press the Conf key.
Single Line Telephone
If you are busy on a call, an off-hook signal is heard indicating the incoming Door Box call.
1. Press the Flash key or hookflash to place your active call on hold.
2. Dial the door box access code (802 by default) plus the door box number (1~8) to answer the
Door Box call.
To retrieve the original call, hang up. The original call rings the single line telephone.
To activate Call Forwarding Off-Premise for a Door Box:
This option only works for ISDN PRI or BRI Trunks.
1. At the multiline terminal, press Speaker + dial SC 822 .
- OR -
At the multiline terminal only, press the External Forward by Doorphone key (Program 15-07-01 or
SC 851 , code 54).
- OR -
At the single line telephone, lift the handset + dial 822 .
Features and Specifications Manual
SL1000
D
1-201