NEC SL1000 Features And Specifications Manual page 192

SL1000
• Like a One-Touch Key, a user can have DSS Console keys for Direct Station Selection, Trunk Call-
ing, Personal Speed Dial, Speed Dialing, and Service Code access.
• The DSS Console provides one-touch External and Internal Page zone access. Refer to
External on page 1-383
• You can program the DSS Console keys with service codes to provide the functions of many of the
Programmable Function keys. The stored service code can have up to three digits, but it can have
additional option codes added (e.g. to set Immediate Call Forward for all calls. Trunk Group (
and Virtual Extension (
not allow entry of the additional data required.
• When a multiline terminal user is on a call, they can transfer to another station by pressing a DSS
key for that station. It is not necessary to press Transfer to transfer to another station using a DSS
key.
D
When a multiline terminal user is on a call, they must press Transfer to transfer a call off site with a DSS
key.
• Pauses can be entered in the dial string of a DSS/One Touch button. The pause is entered as P in
the dial string and causes the system to wait three seconds before sending the rest of the digits that
follow the P (pause). Multiple pauses can be entered.
• The @ can be entered in the dial string of a DSS/One Touch button. The @ only applies to ISDN and
Intercom calls. When using the @, the system waits for the destination to answer (answer supervi-
sion), and then sends the rest of the digits.
• Entering a P (pause) in a DSS/One Touch dial string can be used for CO calls, Intercom calls, or after
the @ for ISDN calls.
Default Settings
• No DSS Consoles assigned (in Program 30-02-01).
• All DSS Console key ranges are ports 1~60.
• Once a DSS Console is enabled, the console keys are DSS keys (Program 30-03-01).
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Call Forwarding
Central Office Calls, Answering
Central Office Calls, Placing
Door Box
Night Service
One-Touch Calling
Paging, External
Paging, Internal
1-184
and Paging, Internal on page
03) codes can not be programmed on a DSS Console as the system does
*
1-388.
Direct Station Selection (DSS) Console
ISSUE 1.0
Paging,
02)
*