Install The Software - Honeywell ScanPal EDA71 User Manual

5. Install the Honeywell Download Manager tool on your workstation (e.g. laptop
6. Locate the software in file directory.
7. Select Download next to the software zip file.

Install the Software

Note: The EDA71 tablet must have power for the entire length of the install process or it
could become unstable. Do not attempt to remove the battery during the process.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Provisioning mode under Honeywell settings.
3. Tap the toggle button to turn Provisioning mode On.
4. Connect the EDA71 to your workstation.
5. On the EDA71, swipe down from the top of the screen to see the notifications.
6. Tap the Android System notification twice, to open the options menu.
7. Select File Transfer.
8. Open the browser on your workstation.
9. Save the DisplayLink Presenter file (*.apk), version 2.3.0 or higher, in one of the
10. Swipe up from the bottom of the Home screen to access all apps.
11. Tap AutoInstall Settings and verify AutoInstall is enabled.
12. Tap Packages Upgrade from the AutoInstall Settings screen. The computer
13. Once installation is complete, turn Provisioning mode Off.
6
or desktop computer) prior to trying to download any files.
following folders on the EDA71 tablet:
• Internal shared storage\honeywell\autoinstall
Files saved to this folder for installation, do not persist when a Full factory
reset or Enterprise data reset is performed.
• IPSM card\honeywell\autoinstall
Files saved to this folder for installation, do not persist when a Full factory
reset is performed. However, the software does persist if an Enterprise data
reset is performed.
initiates a reboot and installs the software. When the install is finished, the lock
screen appears.
ScanPal EDA71 Display Dock