Set Peripheral Settings; Set Mode Settings - Honeywell ScanPal EDA71 User Manual

5. To set the density, tap Density and chose one of the following options:
6. To set the how the tablet backlight responds when a display is connected, tap

Set Peripheral Settings

1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap DisplayDockService.
3. To set the right mouse button to the back key, tap Right mouse button to
4. Tap HDMI audio to toggle between

Set Mode Settings

1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap DisplayDockService.
3. To set the external monitor mode:
10
• 160
• 240
• 320
• 400
Reduce backlight, and then one of the following options:
• Tap Enable, to have the tablet backlight automatically dim.
• Tap Disable, for no adjustment.
toggle the feature on or off.
external monitor.
• Select Primary Mode to automatically adjust as configured in settings or
• Select Mirror mode to match the terminals settings.
Sound to terminal or
ScanPal EDA71 Display Dock
Sound to