Makita HS301D Manual page 17

W
iring diagram
Fig. D-4
Put controller's lead wires to this groove.
Do not put any lead wires
on these ribs.
(10)
Wiring in Handle set R
The lead wires bundled with tape have to be put on the lead wire
(white) between Line filter and Switch (11).
(17)
tape
Flag receptacle has to be so connected that the lead wire can
be guided to Handle set R (17) side.
Put Line filter to this space if it is used.
(11)
Do not put any lead
wires on these ribs.
Lead wire
(white)
Flag receptacle
(11)
P 17 / 17
Do not put any lead
wires on this rib.
Terminal