Specifications; General Power Tool Safety Warnings; Save All Warnings And Instructions For Future Reference - Makita CC300D Instruction Manual

ENGLISH (Original instructions)
1. Buttons
2. Battery
3. Clamping screw
4. Depth guide
5. Bevel scale plate
6. Cutting line
7. Lock-off lever
8. Switch trigger
9. Shaft lock
10. Hex wrench

SPECIFICATIONS

Diamond wheel diameter
Max. wheel thickness
Max. Cutting depth
Rated speed (n)/No load speed (n
Overall length
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
...... Read instruction manual.
...... Wear safety glasses.
Intended use
The tool is intended for cutting in glass and masonry
materials with a diamond wheel and water.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
4
Explanation of general view
11. Tighten
12. Loosen
13. Inner flange
14. Diamond wheel
15. Outer flange
16. Hex bolt
17. Protrusion (bigger side)
18. Tank holder
19. Screw A
20. Notch
Model
at 0°
at 45°
)
0
Net weight
END221-4
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
ENE025-1
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
GEA006-2 tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
21. Motor housing
22. Screw B
23. Tank
24. Tube
25. Cap
26. Open
27. Water supply cock
28. Close
CC300D
85 mm
0.8 mm
25.5 mm
16.5 mm
-1
1,400 (min )
300 mm
D.C. 10.8 V
1.7 kg