Installation Instructions; Reversing The Door - Baumatic BTD1 Instruction Manual

INSTALLATION INSTRUCTIONS

- THE TUMBLE DRYER IS FULLY COMPATIBLE WITH ANY
KITCHEN UNITS THAT HAVE THE DIMENSIONS DEPICTED IN
THE FIGURE BELOW AND COMPLIES WITH STRINGENT EEC
REGULATIONS.
- YOUR DRYER IS PROVIDED WITH A VENT HOSE WHICH WILL
EXTEND TO APPROX 2.4m (8ft). WE STRONGLY RECOMMEND
THAT THIS IS VENTED THROUGH THE WALL WITH THE
ATTACHMENT PROVIDED.
12

REVERSING THE DOOR

* Your tumble dryer's door can be positioned to open either to the
right or to the left. Please follow the instructions below to change
the door position. This operation must not be performed whilst the
appliance is connected to the electricity supply.
2. Pull the hinge cover (F) forwards
to remove it. Remove two outer
screws (G). Remove door. Fit the
latch plate (D) with screws (C).
4. Fit screw (E) to secure the hinge cover.
Remove the screw (A) at the top of the
door and refit strike (B) as shown.
13
1. Open the door. Undo the screw
(A), remove the switch strike (B)
and replace the screw. Remove
the screws (C) and latch plate
(D). Remove the hinge cover
screw (E). Close the door.
3. Reverse the door and place
against the dryer's doorway so that
it is in the closed position. Refit the
screws (G) and hinge cover(F).
Open the door.