Advertisement
C7355A ROOM IAQ MONITOR
INSTALLATION
1. To separate the backplane from the detector, rotate
the backplane clockwise according to the direction
of the arrow (See Fig. 2 and 3).
2. Use a screwdriver to punch out the appropriate
opening. See Fig. 4.
3. Pull wires through the opened hole. See Fig. 5 and 6.
31-00436—01
Fig. 2.
Fig. 3.
Fig. 4.
4. Unplug the terminal block from the contact pin. See
Fig. 7.
5. Connect the cable to the terminal block, then secure
with the mounting screw. See Fig. 8, 9, and 10.
4
Fig. 5.
Fig. 6.
Fig. 7.
Fig. 8.
Advertisement
