0181 Closed Table 0181 Overview - Canon OMNERA 400T Operator's Manual

Introduction
System description

1.3.4 0181 Closed Table 0181 Overview

The figure shows the main parts of the closed table.
Head end
1. Maneuver hand control (optional)
2. Image receptor holder
3. Vertical lift
4. Table top
5. Kick box control
1.3.4.1 Intended Use, Closed Table 0181
The Table is intended for use in a hospital environment during radiographic diagnostic exami-
nations, together with an X-ray tube support and an image receptor holder.
The Table is only intended to be used by trained radiographers, service technicians and
product specialists
The main purpose of the Table is to supply the patient with a positioning support during a di-
agnostic examination and to make it possible to position the detector.
Other use of the closed table may result in potentially hazardous conditions to the operator
and/or patient.
OMNERA®
8
9
Fig. 1-5 Main parts closed table
0180-095-418-EN Rev. 6.1
Page 6
4
6
5
6. Foot control (optional)
7. Emergency stop
8. Patient hand grip (optional)
9. Cover segments for the vertical lift
Foot end
1
7
2
3
Operator´s Manual
2020-09-18