Safety
Mechanical Safety
2.8.3 Table
Possible squeeze hazard areas are indicated in the figure.
Squeezing hazard can occur between the:
• table top (1) and the top of the imaging unit (4); when the table top (1) is in the outer posi-
tion (Y-direction) or moving in a longitudinal direction (X-direction).
• table top (1) and the imaging unit rail (6); when the table top (1) is in the outer position (Y-
direction).
• imaging unit (4) and the cover (5); when the imaging unit is moving in a longitudinal direc-
tion (X-direction).
• column (7) and the footplate (8); when the column (7) is moving downwards (Z-direction).
• cover (2) and the column cover foot (3); when the column (7) is moving downwards (Z-
direction).
0
1. Table top (X/Y/Z)
2. Cover
3. Column cover foot
4. Imaging unit (X)
WARNING!
Squeezing hazards may occur between the table top and the imaging unit or the imag-
ing unit rail.
OMNERA®
Z
Y
X
6
7
8
0073-095-418-EN Rev. 5.1
1
2
3
4
Fig. 2-4
5. Cover
6. Imaging unit rail
7. Column (Z)
8. Footplate
Page 20
5
002010.eps
Operator´s Manual
2020-09-25