Page 1
Operating Instructions – Washer Dryer Baumatic BW325SL Control Panel Wash program selection knob This control dial allows you to select the wash program of your choice. Start/Stop button Once a wash program has been selected, this button should be pressed to start the wash cycle.
Page 2
LCD display Wash program selection dial Selecting a wash programme • Load your laundry and put detergent in the relevant compartment of the soap drawer • Close the door firmly • Select the most appropriate wash programme for the garments that you are washing by turning the programme selector dial •...
Page 3
Select any programme options by using the programme option buttons underneath the LCD display • Any program option that you select, will affect the length of time that the wash cycle will take to complete. The • LCD display will update to reflect this change. Press the Start/Stop button •...
Page 4
The appliance will go onto Pause status and the wash programme will be cancelled. • The door will remain locked for two minutes before it is possible to open the door and take out the garments. • Before opening the door you must select the drain programme. Otherwise there may still be water in the drum •...
Page 5
To select a programme option, you should press the appropriate programme option button. • • A light will appear above the timer display, to indicate which programme option you have selected. One, two or three programme options can be selected at a time, depending on the wash programme that you •...