Download
Share
Print this page
Tripp Lite DMCSTP65CBP Installation Manual
  1. Manuals
  2. Brands
  3. Tripp Lite Manuals
  4. Camera Accessories
  5. DMCSTP65CBP
  6. Installation manual
Tripp Lite DMCSTP65CBP Installation Manual

Tripp Lite DMCSTP65CBP Installation Manual

Battery box and battery for the mobile interactive display
Hide thumbs Also See for DMCSTP65CBP:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Installation Guide
Battery Box and Battery for the
Mobile Interactive Display
The complete installation video for DMCSTP65CBP, DMCS32OXPGG
and DMCS60100XXBB models can be found at tripplite.com
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
© 2020 Tripp Lite. All rights reserved.
1
2
3
4
5
6
7
8

Advertisement

loading

Related Manuals for Tripp Lite DMCSTP65CBP

Summary of Contents for Tripp Lite DMCSTP65CBP

  • Page 1: Table Of Contents

    5. Operational Guidelines for the Power Module 6. Attaching the Battery Box and Battery to the Mobile Cart 7. Warranty The complete installation video for DMCSTP65CBP, DMCS32OXPGG and DMCS60100XXBB models can be found at tripplite.com 1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support...

  • Page 2: Important Safety Instructions

    1. Important Safety Instructions SAVE THESE INSTRUCTIONS This manual contains instructions and warnings that should be followed during the operation of this product. Failure to heed these warnings may cause product damage, accident, fire, electric shock, serious injury or death. The warranty may also be affected. Refer to the Interactive Touchscreen Owner’s Manual for more information.

  • Page 3: Installing The Battery In The Enclosure

    2. Installing the Battery in the Enclosure 2.1 Preparing the Enclosure Unlock the enclosure using the keys provided in the packaging. Open the front door and remove the U-shaped bracket inside the enclosure by using the included hex key to loosen the screws.

  • Page 4: Connecting The Battery To The Power Module

    2. Installing the Battery in the Enclosure 2.2 Installing the Battery Loosen the hex screws located on the outside of the enclosure to remove the battery retention L-shaped bracket. Note: Save hardware for reinstallation. Carefully slide the battery into the battery compartment. Note: The battery terminals must face toward the front door.

  • Page 5: Connecting The Power Cables

    4. Connecting the Power Cables Connect the C13 connector on the input power cord to the AC inlet on the interactive touchscreen panel. C13 Connector Connect the C14 connector on the AC input power cord to the output port on the power module. C14 Connector The additional power cord connects the power module’s pigtail to a properly grounded outlet.

  • Page 6: Operational Guidelines For The Power Module

    5. Operational Guidelines for the Power Module 5.1 Connection to a Wall Outlet (Line Mode) After you plug the power module into a live AC outlet, the power module (in “Standby” mode) will automatically charge the battery, but it will not supply power to the output outlet until it is turned “on.” The power LED (~) will not be illuminated.

  • Page 7: Attaching The Battery Box And Battery To The Mobile Cart

    6. Attaching the Battery Box and Battery to the Mobile Cart Caution! For safe installation, do not attempt to attach the battery box (with battery installed) to the mobile cart without adequate help. Battery box and battery installation is the same for mobile cart models DMCS60100XX and DMCS3270XP.

  • Page 8: Warranty

    Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and illustrations may differ slightly from actual products.

This manual is also suitable for:

Dmcs32oxpggDmcs60100xxbb