To Set Illumination Pattern For Call Indicator Lamp; To Enable/Disable Rtp Alarm; To Enable/Disable Dtmf Tone - NEC Univerge SV9500 User Manual

Tone Type 1 to Tone Type 8:
In the preview function, each ringer
tone sounds continuously. However
when " 0 Automatic" is selected, each
ringer pattern of internal and external
incoming calls is determined by the
initial system settings. For details,
please contact the system
administrator.
When selecting " 0 Automatic", the
preview function will not operate.
Setting by Feature key and become
effective.
The "Music Ring 1/2/3" have been
downloaded at factory to terminal
firmware 2.0.0.0 or later. When you
use ring tone music source other than
"Music Ring 1/2/3", please download
other music file.
For the procedure of downloading a
ringer tone file, please refer to
DOWNLOAD A
TO SET ILLUMINATION PATTERN
FOR CALL INDICATOR LAMP
Following explains how to set the illumination
pattern (color of Call Indicator Lamp).
1.
Display the Menu screen, and select "Settings"
2.
Select " 1 User Settings".
3.
Select " 1 Incoming Call"
4.
Select " 4 Illumination".
5.
Select " 1 External Call" or " 2 Internal Call".
6.
Select a desired illumination pattern.
"TO
FILE".

TO ENABLE/DISABLE RTP ALARM

Following explains how to enable/disable RTP
Alarm. The RTP Alarm tone allows the terminal user
to be notified that the voice packet is not received in
a certain period of time because of the network
delay etc.
1.
Display the Menu screen, and select "Settings"
2.
Select " 1 User Settings".
3.
Select " 2 Talk"
4.
Select " 1 RTP Alarm".
5.
Select whether to ring the RTP Alarm.
If the " 0 Automatic" is selected, this
feature is activated in accordance with
the system data setting. If it is not
specified by the system data this
feature is in effect (RTP Alarm =
'ON'). For details, please contact the
system administrator.

TO ENABLE/DISABLE DTMF TONE

Following explains how to set whether DTMF tone
is played when the other party telephone pressed a
button during a call.
1.
Display the Menu screen, and select "Settings"
2.
Select " 1 User Settings".
3.
Select " 2 Talk"
4.
Select " 2 DTMF Tone".
5.
Select whether DTMF tone is played.
20
TERMINAL SETUP