Makita DFT024F Instruction Manual
Hide thumbs
Also See for DFT024F:
- Instruction manual (80 pages) ,
- Instruction manual (65 pages) ,
- Instruction manual (68 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DFT024F
Summary of Contents for Makita DFT024F
- Page 1 INSTRUCTION MANUAL Cordless Screwdriver DFT024F DFT025F DFT060F Read before use.
-
Page 2: Specifications
Noise The vibration total value (tri-axial vector sum) deter- mined according to EN62841-2-2: The typical A-weighted noise level determined accord- Model DFT024F ing to EN62841-2-2: Work mode: screwdriving without impact Model DFT024F Vibration emission (a ) : 2.5 m/s... -
Page 3: Ec Declaration Of Conformity
Model DFT060F Avoid body contact with earthed or grounded Work mode: screwdriving without impact surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of elec- Vibration emission (a ) : 2.5 m/s or less Uncertainty (K) : 1.5 m/s tric shock if your body is earthed or grounded. -
Page 4: Cordless Screwdriver Safety Warnings
Always wear protective goggles to protect When using the tool, do not wear cloth work your eyes from injury when using power tools. gloves which may be entangled. The entangle- The goggles must comply with ANSI Z87.1 in ment of cloth work gloves in the moving parts may the USA, EN 166 in Europe, or AS/NZS 1336 result in personal injury. - Page 5 Do not touch the terminals with any con- causing fires, personal injury and damage. It will ductive material. also void the Makita warranty for the Makita tool and charger. Avoid storing battery cartridge in a con- tainer with other metal objects such as Tips for maintaining maximum nails, coins, etc.
-
Page 6: Functional Description
Indicating the remaining battery capacity FUNCTIONAL DESCRIPTION Only for battery cartridges with the indicator CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge CAUTION: Always switch off the tool before... -
Page 7: Overheat Protection
Overheat protection NOTE: Use a dry cloth to wipe the dirt off the lens of the lamp. Be careful not to scratch the lens of lamp, or When the tool/battery is overheated, the tool stops it may lower the illumination. automatically. - Page 8 Remove the battery cartridge of motor the motor fails to detect and cool the tool down. If the the heat because the indicator does not stop, ask cord has broken or other your local Makita Service reasons. Center for repair. 8 ENGLISH...
- Page 9 LED indicator Beeper Motor failure detection Motor failure has been Blinks in red and green A series of short beeps Ask your local Makita detected. At this time, alternatively. Service Center for repair. tool does not work. Maintenance alarm A maintenance time has Blinks in yellow.
-
Page 10: Installing Hook
Procedure 2 ASSEMBLY In addition to Procedure 1, insert the bit-piece into the sleeve with its pointed end facing in. CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Installing or removing driver bit/socket bit ►... -
Page 11: Operation
Discoloration, deformation or cracks may result. 360° To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should 300° be performed by Makita Authorized or Factory Service 240° Centers, always using Makita replacement parts. 180° 120°... - Page 12 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885820-227 www.makita.com 20200715...