Advertisement
Cisco TelePresence MXP Series
Contents
Introduction
MENu ADDRESS
Control Panel >
CHANNEL HuNTING
Network >
MAX CHANNELS:
ISDN, External, Leased E1/T1 >
Channels may be used for PRIs that are provisioned for a lower number of channels.
ISDN-PRI Settings >
LOW CHANNEL:
CHANNEL HUNTING
selecting channels for outgoing calls. Low Channel may be used for PRIs provisioned with specific
requirements for B-channel usage.
HIGH CHANNEL:
selecting channels for outgoing calls. High Channel may be used for PRIs provisioned with specific
requirements for B-channel usage
SEARCH:
Specifies where the system will start searching for available B-channels for outgoing calls.
Search may be used for PRIs provisioned with specific requirements for B-channel usage.
HIGH:
number.
LOW:
The system will start searching for available B-channels at the specified Low Channel number.
Control Panel >
T1 CABLE LENGTH 1
Network >
Configures the ISDN-PRI Line Settings.
ISDN, External, Leased E1/T1 >
Specify the distance (0-133 ft) of the CSU connected to the E1/T1 Port 1 on Codec 1.
ISDN-PRI Settings >
LINE SETTINGS
E1 CRC-4
Control Panel >
Network >
E1 CRC-4 is used for most E1-PRI configurations.
ISDN, External, Leased E1/T1 >
ON:
Select On if E1 CRC-4 is supported by your E1 network equipment.
ISDN-PRI Settings >
OFF:
Select Off if E1 CRC-4 is not supported by your E1 network equipment.
LINE SETTINGS
SuB ADDRESS
Control Panel >
Network >
Using a Sub Address enables you to connect up to eight ISDN terminals to the same ISDN telephone
ISDN, External, Leased E1/T1 >
number and line. The terminals are addressed by using different sub addresses.
ISDN-PRI Settings >
To call a terminal with a sub address, separate the ISDN telephone number and the sub address with a
ADVANCED ISDN SETTINGS
'*'.
Example: 12345678*2 (up to four digit sub addresses are possible)
VALIDATE NuMBERS (MSN)
Control Panel >
Network >
The use of MSN (Multiple Subscriber Number) enables you to attach different ISDN terminals, with
ISDN, External, Leased E1/T1 >
different numbers, to the same physical ISDN telephone line. If available this service can be ordered
ISDN-PRI Settings >
from your telephone company.
ADVANCED ISDN SETTINGS
ON:
When set to On only calls to the numbers specified in the Line Setup menus will be answered.
OFF:
When set to Off all calls will be answered.
D14791.01 MXP Series Administrator Guide F90, August
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
Getting started
SETTINGS DESCRIPTION
Set the maximum number of channels the system may use at any given time. Max
Set the lowest numbered B-channel that may be used by the system when
Set the highest numbered B-channel that may be used by the system when
The system will start searching for available B-channels at the specified High Channel
2011.
The menu structure
The settings library
The settings library
69
Appendices
INFORMATION
The system will start searching for available B-channels at
channel 31, since Search is set to High and High Channel is
set to 31.
The system will search for channels down to channel no 1,
since Low Channel is set to 1.
Furthermore; if the user tries to make a 31 channel call,
the call will be established with 30 channels, since Max
Channels is set to 30.
CSU - Channel Service Unit
CRC - Cyclic Redundancy Check
This service is dependent on your service provider and has
limited access on some ISDN networks.
MSN - Multiple Subscriber Number
Administrator guide
Contact us
PRODuCT
All with
ISDN-PRI
All with
ISDN-PRI
All with
ISDN-PRI
All with
ISDN-PRI
All with
ISDN-PRI
www.cisco.com
Advertisement
