Leveling Build Plate - Grizzly G0922 Owner's Manual

Custom Print Setup
For tasks that require very specific settings and
resolving print-quality issues, print settings can
be precisely calibrated through the custom print
setup pane. To open the custom pane, select the
"Custom" button (see Figure 23).
Figure 23. Custom print settings.
We suggest using the recommended settings
with your initial prints and moving to the custom
settings when you have a specific need. Because
the range of options is so wide, giving detailed
instructions for the custom settings is beyond the
scope of this manual. However, most settings are
universal across 3D printers and slicer software.
As you learn about 3D printing from other sourc-
es, you will find that the custom print setup has the
options you need to make successful prints.
-24-

Leveling Build Plate

The build plate must be level to ensure molten
filament adheres properly and the nozzle does not
snag on previous layers. In addition to providing
a flat surface, leveling the build plate sets the Z
height of your nozzle, which is essential for proper
build plate adhesion.
Tools Needed
Sheet of Paper .................................................. 1
To level build plate with automatic function:
1. Press "Leveling" icon on main menu. Leveling
menu will open (see Figure 24).
2. Press "Point1" icon (see Figure 24). X and
Y axes will move to first leveling point and
Z-axis will raise to highest point.
Figure 24. Leveling menu.
Model G0922 (Mfd. Since 07/20)
Qty