Chapter 3 - Operation; Activate Redundant Power Supply System; Turn On Power; Interpreting Led Indications - Honeywell TC-RPCXX1 Installation Manual

CHAPTER
3

Activate Redundant Power Supply System

l
3.1 Activate Redundant Power Supply System

Turn on power

l

Interpreting LED indications

l
3.1.1 Turn on power
Open the door on the front of each redundant power supply and flip the power switch to the ON
position. Close the power supply door.
3.1.2 Interpreting LED indications
Each redundant power supply includes the following two diagnostic LEDs, as shown in the following
Figure.
Power - Green
l
Non-Red (non-redundancy) - Amber
l
O
PERATION
- 19 -