Advertisement
Testing a Manual call point
To test a manual call point you will need a call point test key, see instructions supplied with the call point
as the procedures may vary dependent on the call point.
q Push the test key through the hole in the underside of the call point and release the key to activate the call
point.
NOTE: The alarm sounders in the system will be activated by this test. To silence alarms and reset the
system, see operating instructions.
How to replace broken glass or reset the resettable element inside a Manual call point
WARNING: Take appropriate precautions when clearing broken glass to prevent injury.
The following procedures show how to replace glass or reset the resettable element on one type of manual call
point , the procedures may vary dependent on the type of call point, see the instructions supplied with the
manual call point.
Testing a Manual Call Point
3
Fire Panels
4188-424 issue 8_Part 2_07-14_Xenex
Hide quick links:
Advertisement
