Troubleshooting; Optional Accessories - Makita DUC252 Instruction Manual

TROUBLE SHOOTING
Before asking for repairs, conduct your own inspection
first. If you find a problem that is not explained in the
Malfunction status
Chain saw does not start.
Chain does not run.
Motor stops running after a little
use.
No oil on the chain.
It does not reach maximum RPM.
Chain does not stop even the chain
brake is activated:
Stop the machine immediately!
Abnormal vibration:
Stop the machine immediately!
014805

OPTIONAL ACCESSORIES

CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Makita genuine battery and charger
• Saw chain
• Guide bar
• Guide bar cover
• File
• Tool bag
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ from
country to country.
18
Cause
Two battery cartridges are not
installed.
Battery problem (under voltage).
Chain brake activated.
Battery's charge level is low.
Oil tank is empty.
Oil guide groove is dirty.
Oil delivery is not adjusted
properly.
Battery cartridge is installed
improperly.
Battery power is dropping.
The drive system does not work
correctly.
Brake band worn down.
Loose guide bar or saw chain.
Tool malfunction.
manual, do not attempt to dismantle the tool. Instead, ask
Makita Authorized Service Centers, always using Makita
replacement parts for repairs.
Install the charged battery cartridges.
Recharge the battery cartridge. If recharging is
not effective, replace battery cartridge.
Release chain brake.
Recharge the battery cartridge. If recharging is
not effective, replace battery cartridge.
Fill the oil tank.
Clean the groove.
Adjust amount of oil delivery.
Install the battery cartridge as described in this
manual.
Recharge the battery cartridge. If recharging is
not effective, replace battery cartridge.
Ask your local authorized service center for
repair.
Ask your local authorized service center for
repair.
Adjust the guide bar and saw chain tension.
Ask your local authorized service center for
repair.
Action