Advertisement
WARNING:
The erection guardrail must not be used as a substitute for the barrier gate.
6 - Fitting
and bolting
the barrier
gate with M16x100 screw: the
erection guardrail is positioned
horizontally.
9 - At the access levels, the guar-
drails are positioned so as to privile-
ge access by the main face A (face
names shown on the sticker).
10 - Fill the Pre-Use Inspection Report
"T
"
opmosT
module
7 - With slings attached to the 2
lifting rings, the topmost module
is fitted.
Bolt the 4 uprights together using
M24 screws.
The last step
used should
ideally be
placed 21 cm
lower than the
floor being
serviced.
6
WWW.COMBISAFE.COM
Advertisement
