Advertisement
INDIVIDUAL CASE EXAMPLES
These examples are for illustration purpose only. Contact the technical support for details
Roofer access:
When the Escalib cannot be
anchored to the facade, it can be
steadied by push-pull props and
by tying to the parapet.
Suspended:
The Escalib can be suspended.
Cantilevered out on H-beams,
the modules are assembled then
positioned by crane to quickly
provide access to an
excavation.
Tie
Anchored
H-BEAMS
Push-
pull
prop
Gangway
Erection of an Escalib designed for an excavation.
1 - On the installed
module, place the erection
guardrail in the horizontal
position and remove the
barrier gate. Add a new
module already fitted with
a barrier gate and UPN
beams.
UPN
Beam
bolted
to the
Escalib
Escalib
UPN
Beam
bolted
to the
Escalib
Sketch of a suspended Escalib for accessing an
excavation.
2 - Assemble the
modules and swing the
erection guardrail to the
vertical position.
Take up the slack on the
crane slings. Remove the
anchors and the two-
UPN beams supported
on the H-beam.
3 - Lower the Escalib until
the 2 new UPN beams are
resting on the H-beams.
Fasten the anchors.
14
WWW.COMBISAFE.COM
Advertisement
