ABB ACH580-01 Installation, Operation And Maintenance Manual page 40

40
WARNING! To avoid danger or damage to the drive on IT systems and corner
grounded TN systems, see section
systems
Analog Inputs and Outputs
Typical Type 1
1
Note: UDC+ and UDC- terminals are used for external brake chopper units.
Power wiring torque table
Frame size
T1/U, T2/V, T3/W
L1, L2, L3
UDC+ and UDC-
PE Ground
ACH580-01 Installation
ACH580 Installation, Operation and Maintenance Manual
on page 16.
R7
13
Digital Inputs
6
1
9
R6
lb-ft Nm
22.1 30
22.1 30
22.1 30
7.2 9.8
Drive compatibility for various electrical power
R7 R8
lb-ft Nm lb-ft
29.5 40 29.6
29.5 40 29.6
29.5 30 29.5
7.2 9.8 7.2
Panel Connector
Power (Green) and
Fault (Red) LEDs
Relay Outputs
5
Shroud
9
R9
Nm lb-ft Nm
40 51.6 70
40 51.6 70
40 51.6 70
9.8 7.2 9.8