Advertisement
MR 27.5.1 release DOES NOT SUPPORT MT sensors. The network HAS to be running 27.5.11 for MT sensors to be connected to the eligible MR
gateways.
MR 27.5.11 version will only show up on Organization that has at least 1 MT sensor claimed in a network.
Installation Instructions
NOTE: Each MT12 comes with an instruction guide within the box. This Quick Install Guide(QIG) contains detailed step by step guides and images to
assist you in the physical installation of the sensors.
Choosing Your Mounting Location
As MT sensors rely on a gateway for connectivity to the Dashboard, while choosing a mounting location, make sure that a working compatible gateway is in
range of the sensor.
Some examples of ideal mounting locations:
1. On a wall to detect any leaks on the floor of a room
2. Inside or on top of a rack to detect any leaks near the rack.
5
Advertisement
