Advertisement
Package Contents
Unit
Guides
Battery
Leak Detection Cable
Mounting equipment
Pre-Installation Preparation
You should complete the following steps before going on-site to perform an installation
Configure Your Network in Dashboard
The following is a brief overview of the steps required to add an MT12 to your network. For detailed instructions about creating, configuring and managing
Meraki Sensor networks, refer to the online documentation (https://documentation.meraki.com/MT).
MT12-HW
Quick Installation Guide
2x AA Batteries
1x MA-CBL-LEAK-1 (8ft/2.4m)
Wall Mount Backplate
4x Screws
1x Magnet
1x VHB Tape
8x VHB Cable anchors
1 x Rubber cap
3
Advertisement
