Obv-Aig/Aiog/Rtd - Hitachi MICRO-EHV+ Applications Manual

2.20.4 OBV-AIG/AIOG/RTD

Part names and functions
[Upper side]
(1) Analog input terminal or
RTD input terminal
No. Model name
(1) OBV-AIG Analog input terminal
OBV-AIOG
OBV-RTD RTD input terminal
(2) OBV-AIG Analog input terminal
OBV-AIOG Analog output terminal
OBV-RTD RTD input terminal
(3) OBV-AIG DIP switches
OBV-AIOG
OBV-RTD
(4) Common Connector to basic unit
(2) Analog input terminal or
Analog output terminal or
RTD input terminal
Name
Terminals to connect analog input signals or RTD input signals.
Cable diameter : Single wire : 0.2 mm
Terminals to connect analog I/O signals or RTD input signals.
Cable diameter : Single wire : 0.2 mm
DIP switches to change voltage / current mode.
Set the DIP switches before insertion the option board.
- There is no DIP switch in OBV-RTD.
A connector is located at the back side to connect basic unit.
2 – 41
Chapter 2
Model name
OBV-AIG / AIOG / RTD
Weight
20g (0.04 lb.)
[Back side]
(3) DIP switches
(Except OBV-RTD)
Details
2
to 1.5 mm
2
Strand wire : 0.2 mm to 1.0 mm
2
to 1.5 mm
2
Strand wire : 0.2 mm to 1.0 mm
Specifications
(4) Connector to
basic unit
2
2
2
2