Terminal Layout And Wiring - Hitachi MICRO-EHV+ Applications Manual

2.16.2 Terminal layout and wiring

(1) MV-A40DR (AC power type)
*: For the DC input, both sink and source types are available. It is possible to reverse the polarity of 24 V DC.
Refer to page 4-5 for wiring to a rotary encoder.
Input power 24VDC
24V 1 3 5
0V 0 2 4 6
AC NC 1 3
AC FE 0 2 4
Power supply 100 to 240VAC
(2) MV-D40DR (DC power type) Input wiring is same as MV-A40DR.
0V NC 1 3
24V FE 0 2 4
Power supply 24VDC
(3) MV-D40DTPS (DC power type) Input wiring is same as MV-A40DR.
0V NC 1 3 C10
24V FE 0 2 C10
Power supply 24VDC
(4) MV-D40DT (DC power type) Input wiring is same as MV-A40DR.
0V NC 1 3 V10
24V FE 0 2 V10
Power supply 24VDC
7 C0 9 11 13 15
C0 8 10 12 14
5 NC 7 NC 9 11
C10 6 C11 8 10
Power for load (Relay output)
5 to 30VDC, 5 to 250VAC
5 NC 7 NC 9 11
C10 6 C11 8 10
Power for load (Relay output)
5 to 30VDC, 5 to 250VAC
V10 5 7 9 11
V10 4 6 8 10
C10 5 7 9 11
C10 4 6 8 10
17 19 21 23 C1
16 18 20 22 C1
NC 13 NC 15 C14
C12 12 C13 14 C14
NC 13 NC 15 C14
C12 12 C13 14 C14
13 15 C11 V11 NC
12 14 C11 V11 NC
Power for load 12 / 24VDC
13 15 V11 C11 NC
12 14 V11 C11 NC
Power for load 12 / 24VDC
2 – 21
Chapter 2 Specifications