Page 1
Model T10880 & T10881 G0442 & G0601 Cartridge Filter Replacement with HEPA Filter Upgrade Kit Step One: Remove the filter L-braces from the blower housing, as shown above, by loosening and removing (6) 5/16” x 1”...
Page 2
Step Three: Remove the mounting bracket that secures the intake barrel to the upper stand leg by loosening and removing (8) 5/16” x 1” hex bolts, (16) 5/16” flat washers, and (8) 5/16” nuts. Next, loosen and remove (8) 3/8” x 3/4” hex bolts, (16) 3/8”...
Page 3
Step Five: Attach the rubber gasket to the outlet opening on the blower housing, then attach the outlet connector by securing and fastening (10) 3/8” x 1” hex bolts, (20) 3/8” flat washers, and (10) 3/8” nuts.
...
Page 4
Step Seven: Attach the HEPA leg stand to the outlet connector, as shown above, by securing and fastening (4) 3/8” x 1” hex bolts, (8) 3/8” flat washers, and (4) 3/8” nuts.
...
Page 5
Step Nine: Attach the rubber gasket to the outlet opening, then attach the filter adapter and HEPA filter to the blower housing with (16) 3/8” x 1” hex bolts, (30) 3/8” flat washers, and (14) 3/8” nuts. Tighten and secure all bolts and nuts.